Acqua Brevetti MINIDOS Manuel D'usage Et Entretien page 21

Pompe volumétriques mécanique pour le dosage proportionnel du produit anticalcaire et anticorrosif acquasil 20/40. appareil brevete
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4)
Check periodically that AcquaSIL 20/40
has to decrease proportionally with water treated). If this is not the case, please contact Acqua
Brevetti 95 s.r.l. (telephone: +39.(0)49.8973432 e-mail info@acquabrevetti95.it).
B1.6 Allowed installation schemes
Perform the installation according to one of the following schemes. Follow the entrance and exit rows
stamped on the back side of the water meter box. Any other configuration may lead to the non proper
working of the device. Do not overtighten the junctions. The manufacturer discharge himself from any
responsibilities caused to people or things in case the schemes of the manual are not respected. MiniDOS
(code PM009) dosing pump is located in the package with the Dima connection disassembled
installation of the pump it is necessary to assemble the connection. The packaging includes: N°1 Dima
turning connection assembly, N°1 o-ring seal for the connection, N°2 white sealing.
1. Insert the sealing in
the dedicated site
B1.7 7 Procedure for the rotation of the water meter box
In order to realize some of the allowed installation schemes it is necessary to rotate the water flow meter
box. Follow the following instructions:
Usually the pump is
mounted as shown in the
picture
Keep the pump blocked
and unthread the counter
MAN 127
MINIDOS - ENGLISH
®
is regularly consumed (the amount of product inside the tank
2. Place the T turning
connection on the pump
Pay attention
to the
counterpart teeth Keep
the
T
connection
PLUMB LINE in respect
to the pump, even while
screwing the ring nut
Unthread the Carter
polling it upward
Turn the water meter
box according to your
needs referring to the
rows indicated on the
3. Push the connection
and
screw
it
lightly,
clockwise
Unscrew the 4 screws
Insert the counter hitting
the 4 screws
.
Before the
4. Manually fix it
ATTENTION!:
even
when
the
Dima
connection
is
turned
the entrance
will be
from the backside!
Unscrew with the help of
a 3 mm allen key
Fairly screw the 4 screws
that compact the pump
PAG.E-8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pm008Pm009

Table des Matières