Care And Maintenance - Sartorius Combics Pro CISPRO Manuel D'installation Et De Sécurité

Care and Maintenance

Cleaning
!
Do not use any aggressive cleaning
agents (solvents or similar agents),
concentrated acids or pure alcohol.
$ Make sure that no liquid penetrates the
scale housing
$ Clean the scale using either a paint brush
or a dry, soft and lint-free cloth.
Storage and Shipping Conditions
$ To ensure safe shipment, your scale has
been packaged using environmentally-
friendly materials.
You should retain these materials in case
you need to package your scale for stor-
age or return shipment.
$ Storage temperature: –20°C to +75°C
$ Permissible moisture level for storage of
the packaged scale: 90% max.
$ Read and follow the instructions given in
the section entitled "Safety Inspection."
Safety Inspection
If there is any indication that safe opera-
tion of the scale with the power supply or
power supply is no longer warranted:
– Disconnect from AC power: unplug the
power supply from the wall outlet (mains
supply)
– Lock the equipment in a secure place to
ensure that it cannot be used for the time
being.
Safe operation of the PMA is no longer
ensured when:
– There is visible damage to the power
supply
– The power supply no longer functions
properly
– The power supply has been stored for a
relatively long period under unfavorable
conditions
– The equipment has been exposed to
rough handling during shipment
§ Observe the warning and safety
information
If any of the above apply, notify your
nearest Sartorius Service Center or the
International Technical Support Unit
based in Goettingen, Germany. Mainte-
nance and repair work may only be per-
formed by service technicians who are
authorized by Sartorius and who
– Have access to the required service and
maintenance manuals, or
– Have attended the relevant service
training courses
!
The seals affixed to this equipment indi-
cate that only authorized service techni-
cians are allowed to open the equipment
and perform maintenance work so that
safe and trouble-free operation of the
equipment is ensured and the warranty
remains in effect.
7