HP Photosmart E217 Guide De Démarrage Rapide page 4

Lee_Jackie_QSG_e_ok.fm Page 4 Tuesday, March 29, 2005 1:22 PM
2. Install the Batteries
1. Open the Battery/Memory card door on the side of the
camera by sliding the door toward the front of the
camera.
2. Insert the batteries as indicated inside the door.
3. Close the Battery/Memory card door by pushing the
door down and sliding the door toward the back of the
camera until the door latches.
You can expect performance similar to the following from the
different types of AA batteries that work in your camera:
Alkaline (Starter Batteries)
Lithium
NiMH (1800)
If you use NiMH (rechargeable) batteries, be
sure that you fully charge them before using them
in the camera.
4
HP Photosmart E217/E317 Quick Start Guide
80 to 130 shots
260 to 490 shots
110 to 280 shots