Canon PowerShot S110 Guide De Mise En Route page 49

• You can also configure this setting through touch-screen operations (see
Camera User Guide).
•
When a connection destination is set using the Touch Actions setting (see
Camera User Guide), you can automatically access the function to connect
to the last connected destination from the next time by just dragging on the
screen without needing to perform the connection operation.
2
Choose a Web service.
z z Press the <o><p><q><r> buttons or
turn the <7> dial to choose the icon of
the destination Web service, and then
press the <m> button.
z z When you have selected email, choose
the recipient on the [Select Recipient]
screen and press the <m> button.
3
Connect to an access point.
z z Press the <o><p> buttons or turn the
<7> dial to choose [Add an Access
Point], and then press the <m> button.
A list of detected access points will be
X X
displayed in the [Access Point Connect]
screen.
For further instructions, see "Preparing
X X
to Register a Computer" (= 5 6) or
"Connecting to Access Points in the List"
(= 6 7).
X X For instructions after connecting to an
access point, see "Adjusting Settings
for Using Web Services From CANON
iMAGE GATEWAY" (= 4 6).
Connecting to Web Services
49