Canon PowerShot S110 Guide De Mise En Route page 15

Charging the Battery
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
CB-2LXE
•
To protect the battery and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
1
Remove the battery cover and
insert the battery in the charger.
z z
Remove the cover from the battery, align
the ▲ marks on the battery and charger,
and insert the battery by pushing it in ( )
and down ( ).
2
Charge the battery.
z z CB-2LX: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
z z CB-2LXE: Plug the power cord into the
charger, then plug the other end into a
CB-2LX
power outlet.
The charging lamp turns orange and
X X
charging begins.
X X When the charging is finished, the lamp
turns green.
3
Remove the battery.
z z After unplugging the battery charger,
remove the battery by pushing it in ( )
and up ( ).
Initial Preparations
15