Télécharger Imprimer la page

Honeywell LUTRON TouchPRO Wireless Guide D'installation page 13

Publicité

Les langues disponibles

Les langues disponibles

Special functions
Auto Changeover (Setup Function 0300): When set to Auto, the thermostat automatically selects heating
or cooling depending on the indoor temperature. Heat and cool settings must be at least 2 ºF apart.
Compressor Protection (Setup Function 0580): Forces the compressor to wait a few minutes before
restarting, to prevent damage. During this time, the message "Wait" flashes on the display.
Accessories & replacement parts
Please contact your distributor to order replacement parts.
Cover plate* ............................................................. Honeywell Part Number 32003796-001
Outdoor Temperature Sensor ................................ Honeywell Part Number C7089U1006
Remote Indoor Temperature Sensor ..................... Honeywell Part Number C7189U1005
*(Use to cover marks left by old thermostats.)
Specifications
Temperature Ranges
• Heat: 40 ºF to 90 ºF
(4.5 ºC to 32.0 ºC)
• Cool: 50 ºF to 99 ºF
(10.0 ºC to 37.0 ºC)
Operating Ambient Temperature
• 0 ºF to 120 ºF (-18 ºC to 49 ºC)
Shipping Temperature
• -30 ºF to 150 ºF (-34 ºC to 66 ºC)
Operating Relative Humidity
• 5% to 90% (non-condensing)
Physical Dimensions
• 4-15/16 in H x 6-9/16 in W x
1-7/16 in D
(125 mm H x 166 mm W x
36 mm D)
Optional THP9045 Wiring Module
The THP9045 Wiring Module is designed to be used with applicable thermostats in 1 Heat/1 Cool
retrofit applications where only 4 wires are available. The K terminal on the thermostat can be
used to operate both the fan and compressor on a single wire, and the module is designed to
receive the signal from the K terminal, split that signal and reroute it to operate the compressor,
and/or fan for normal operation. See the THP9045 manual for further details.
P/N 041-338 Rev. C
Electrical Ratings
Terminal
Voltage (50/60 Hz)
W Heating
(Powerpile)
W2 Heating
Y Cooling
Y2 Cooling
Aux Auxiliary heat
O/B Changeover
E Emergency heat
L Heat pump reset
13
TouchPRO Wireless
Running Current
20-30
V
750 mV
20-30
V
20-30
V
20-30
V
20-30
V
20-30
V
20-30
V
20-30
V
69-2655EFS—05
®
0.02-1.0 A
100 mA DC
0.02-0.6 A
0.02-1.0 A
0.02-0.6 A
0.02-1.0 A
0.02-0.6 A
0.02-1.0 A
0.02-0.6 A

Publicité

loading

Ce manuel est également adapté pour:

Lr-hwlv-hvacLutron lr-hwlv-hvac touchpro wireless