Axis Q35-VE Serie Guide D'installation page 21

A Maximum 8 mm
B
3/4
Connect the cables and attach the unit casing to the mounting bracket
1. Insert an SD card in the camera unit (optional).
2. Push the network cable through the black cable gasket in one of the holes in the unit
casing, using the connector guard provided.
3. Pull the network cable back slightly so that the cable gasket adjusts itself on the cable.
NO TICE TICE
NO NO TICE
Not pulling the cable back could cause water to seep in and damage the product.
"
pipe
AXIS Q35-VE Series
21