The following selection is only for locomotives with DCC decoders.
DCC
Please check the instructions for your locomotive to see if these settings can be done.
Select:
Speed Levels
Programming a Locomotive
DCC
Select: Program
Locomotive
First, set the CV value to be edited (according to your decoder / locomotive instructions)
and confirm the selection. First, the CV value being sought is read in; after that you can
change the value in Step 2 and confirm. With this procedure you can change any permissi-
ble CV value.
18
Select
Select
Scroll to
select
Scroll to
select
Select
Confirm
selection