Entering A Locomotive With A Locomotive Card; Finding A Locomotive - Marklin Digital 60657 Mode D'emploi

Entering a Locomotive with a Locomotive Card

Insert the locomotive card; the loco-
motive is immediately ready for use.
The next free memory space is used as
long as no memory space in the locomotive
list has been selected.
Note: If the internal memory placest is full, a memory space must be deleted before a new
locomotive can be taken into the list (see page 19).

Finding a Locomotive

!The locomotive to be found must be the only locomotive standing on the track layout.
Locomotives with mfx decoders do not have to be standing on the track layout by them-
selves.
memory space by pressing
this button (several times if
then additionally press
SHIFT
The Mobile Station is looking for the
locomotive. A search is made in the
protocols mfx, DCC, and MM2 one
after the other.
Look for a free
necessary).
Select:
Find
7