PIONEER DJ DDJ-WeGO4 Mode D'emploi page 10

STEP 1 Installing rekordbox
If this is your first time to use rekordbox or if you are using rekordbox 3 or earlier, follow this procedure to install the software.
If you have already installed rekordbox 4, update it to the latest version.
Obtaining the rekordbox software
1 Access the rekordbox product site.
https://rekordbox.com/en/store/
! The page content is subject to change without notice.
2 Check the Get Started guide and then click [Free To
Download].
3 Carefully read the terms of the software license
agreement and select the [Agree] check box if you agree.
When the check box is selected, [Download] becomes clickable and
downloading of rekordbox begins when it is clicked.
Installing the rekordbox software
The installation procedure depends on the operating system (OS) on the
computer you are using.
Do not connect this unit and the computer until installation is
completed.
Installation Procedure (Mac)
1 Unzip the downloaded rekordbox software file.
2 Double-click the unzipped software file to launch the
installer.
3 Read the terms of the license agreement carefully,
and if you agree, click [Agree].
! If you do not agree to the contents of the license agreement, click
[Disagree] to quit installation.
10
En
4 If the installation completion screen appears, click
[Close] to close the rekordbox installer.
Installation Procedure (Windows)
! Log on as the user which was set as the computer's administrator
before installing.
1 Unzip the downloaded rekordbox software file.
2 Double-click the unzipped software file to launch the
installer.
3 Read the terms of the license agreement carefully,
and if you agree, select [I accept the terms in the License
Agreement], then click [Next].
! If you do not agree to the contents of the license agreement, click
[Cancel] to cancel installation.
! After the installation destination is specified, the installation starts.
The message of successful installation appears once installation is
completed.
4 Click [Finish] to quit the rekordbox installer.
The installation is now complete.