Intended Use; Features - Go A 2024 Mode D'emploi

Intended Use

This laminator can be used for the hot or cold lamination of photos, card,
documents, paper etc. Any other use is considered unintended use. Unau-
thorised modifications or reconstructions are not permitted.

Features

Protection and refinement of your documents. Lamination of photos, docu-
ments, graphics etc. up to the sizes A3 (A 3024, A 3048) and A4 (A 2024,
A 2048).
The device operates using 4 heating rollers (A 2048, A 3048) or 2 heating
rollers (A 2024, A 3024), has a fast warm-up phase and laminates without
carriers.
• An LED strip indicates the operating status
• Automatic switch-off in the event of overheating
• High quality heating system prevents smudging and blistering
• Warm-up phase of approx. 2 minutes (8µm setting), max. 5 minutes
(other settings)
• Cool down phase to room temperature, approx. 30 minutes
• Foil thickness using A 2024 + A 3024: min. 80 μm, max. 175 μm
• Foil thickness using A 2048 + A 3048: min. 80 μm, max. 250 μm
Laminating system:
Maximum laminating width:
Maximum lamination thickness:
Laminating speed:
Power supply:
Rated input power:
Dimensions (L x W x H):
Weight:
Hot roller technology,
4 heating rollers (A 2048, A 3048)
2 heating rollers (A 2024, A 3024)
338 mm (A 3024, A 3048)
240 mm (A 2024, A 2048)
0.8 mm (A 2048, A 3048)
0.6 mm (A 2024, A 3024)
430 mm/min (A 2024, A 3024)
600 mm/min (A 2048, A 3048)
220-240 Volt / 50 Hz
Max. 800 W, 3.48 A (A 3024, A 3048)
Max. 500 W, 2.17 A (A 2024, A 2048)
482 x 191 x 124 mm (A 3024, A 3048)
382 x 191 x 124 mm (A 2024, A 2048)
approx. 2.84 kg (A 3024),
approx. 3.25 kg (A 3048)
approx. 2.0 kg (A 2024), approx. 2.3 kg (A 2048)
17