Important Information; Exemption From Liability - Go A 2024 Mode D'emploi

●
Metallic objects cannot be laminated.
●
Do not laminate heat sensitive materials, such as thermal paper, in the
device.
●
Lamination of moist documents produces poor results.
●
Maintain a pause of at least 15 seconds between each lamination
process.
●
Allow the device to cool down for at least 30 minutes after use.
●
Only transport the device when it is in a cool state.
●
Never touch hot parts of the device. Risk of burns! Handle the foil
pockets just laminated with due care and attention. They are very hot!

Important Information

●
ID cards and documents could loses their validity if they are laminated
because the official status of the document can no longer be validated.
●
If you transfer the laminator to others, always hand over this operating
manual with it.
●
If very soft material (such as serviettes) or very small size material is to
be laminated, we recommend inserting a folded sheet of paper in the foil
pocket too, to prevent the possibility of the document being laminated
from jamming. The folded edge of the sheet must be inserted into the
laminator first.

Exemption From Liability

We cannot guarantee that the information which relates to the technical
properties of the product or to the product itself contained in this document is
correct. The product and its accessories described in this document are sub-
ject to constant improvement and further development. For this reason, we
reserve the right to modify components, accessories, technical specifications
and related documentation of the product described herein at any time with-
out notice.
16