Emerson MEGA MULTIPOL - IP65 Manuel D'installation page 3

■ Pneumatic spool valve island for connection with a control system
(PLC) with a multiwire cable for simple wiring.
■ Easy connection/disconnection due to SUB-D connector and IP65
rated female connector.
■ The IP65 protection class allows for direct incorporation of the
MEGA island into a machine, close to the actuators thus allowing for
an increased number of production cycles.
COMBINATIONS
Modules with up to 16 MEGA spool valves for frame or DIN EN50022 rail
●
mounting can be grouped together.
Optional mixing of:
●
- all spool valve functions,
- 6 or 8 mm O.D. instant fittings.
- Different types of manual override: impulse-type or locking push/turn-type.
- Internal and external pilot pressure supply.
- Pressure separation plate and intermediate pressure supply module.
2
3
1
4
ELECTRICAL AND PNEUMATIC CHARACTERISTICS (see page 10)
Electromagnetic compatibility : in accordance with EU directive EMC 89/336/EEC - CE mark
ORDERING INFORMATION
Multipol IP65 spool valve islands are delivered pre-assembled, tested, ready for installation.
To order:
- Specify the MEGA Multipol-IP65 spool valve island in the 2 or 3 reference lines according
to the desired assembly (see following pages).
- The IP65 rated female connector with 25 or 35 female pin SUB-D connector + cable
is to be ordered separately (see below).
- Mounting and pneumatic accessories as required.
- Supply of installation manual, code : 881 57 878
NOTE: To facilitate ordering the island, use the configuration software which will help you to completely fill in the reference lines in
accordance with the desired application. This configurator is available on CD-ROM (consult us).
ACCESSORIES FOR MEGA MULTIPOL - IP65
Accessory
IP65 rated female connector with 25 female pin SUB-D connector
(for 10 spool valves) + PVC cable. Length:
IP65 rated female connector with 37 female pin SUB-D connector
(for 16 spool valves) + PVC cable. Length:
SPOOL VALVE ISLAND
with multiwire electrical connection
MULTIPOL - IP65
5
7
Description
6
Ports 1 - 3/5
1
Ports 2 - 4
2
Ports 12/14 - 82/84 : with instant fittings for flexible hose
3
Frame (2 Ø4.2) or DIN rail mounting
4
Interconnection modules
5
Electrical connection with SUB-D connector
6
• 25 male SUB-D pins for 10 spool valves
(monostable or bistable)
• 37 male SUB-D pins for 16 spool valves
(monostable or bistable)
Female IP65 Multipol connector with cable lengths of 2, 5 or 10m
7
7
MULTIPOL
IP65
PLC
36/25 36/25 36/25
: with instant fittings for flexible hose
O.D. 10 mm or G1/4 thread
: with instant fittings for flexible hose
O.D. 6 or 8 mm
O.D. 4 mm or ØM5 thread
2 m 881 00 514
5 m 881 00 517
10 m 881 00 522
2 m 881 00 534
5 m 881 00 537
881 00 542
10 m
Code
3