Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Q U I C K S T A R T
i .
I D E A L P O S I T I O N I N G O F T H E P R / 0 1 I N Y O U R R O O M
FILLING YOUR ROOM WITH SOUND
You can take full advantage of the PR / 01 wherever you place the unit speaker system
in your room. Ideally the speaker should have a wall (10-15 cm) behind it to reflect
the bass and have a better render. The sound system is designed to offer you high-
quality stereophonic listening and immersive sound, whether seated or in the vicinity
of the device. As a result, the listener does not have to be in a central position to enjoy
optimum stereophonic sound (which also allows several listeners to simultaneously
enjoy a stereophonic sound broadcast). Furthermore, it is not necessary to place the PR
/ 01 symmetrically to the walls of the room.
i i .
T U R N I N G T H E P O W E R O N / O F F
1.
Insert the power cord into the power cable plug located at the back of the PR / 01
2.
Connect the power cord to the wall socket.
3.
To turn the PR / 01 on, switch the ON / OFF knob at the back of your speaker. The
Bluetooth
LED will start blinking.
®
4.
The PR / 01 will automatically go into standby mode if you leave your device
without signal for 30 minutes. The standby LED light will turn red. To wake up the
device, press the control knob or play music from one of the sources.
5.
To turn PR / 01 into a temporary "off" mode, press the control button until the
LED turns off. Press the button again to restart it. The USB charging ports will
continue to work while PR / 01 is in "off" mode.
6.
To turn PR / 01 off completely, switch the ON/OFF knob at the back of your speaker.
All LED lights and power to USB charging ports will turn off.
* Pat. Pending Active Pression Reflex
i i i .
C H O I C E O F Y O U R S O U R C E
1.
Push the SOURCE / WAKE button to choose your source and / or to switch between
connected sources.
2.
A lit LED light indicates which source you have selected. Order of connections
(from left to right): Bluetooth
®
AptX, Optical, AUX 1: RCA, AUX 2: 3.5 stereo jack.
U S I N G T H E P R / 0 1 W I T H
Y O U R D E V I C E S
When the main power switch is turned on, the output volume is set to 40%. When first
connecting a new audio source, start with a low volume and gradually turn up the
volume.
In general audio quality will be best with the audio source playing at default (high-
maximum) volume while using the PR/01 controls to limit the overall loudness.
i .
B L U E T O O T H
®
A P T X C O N N E C T I O N
Your PR / 01 is equipped with a last generation Wireless Bluetooth
technology allows you to send your music wirelessly from your computer, tablet or
smartphone to your NATIVE UNION and La Boite concept speaker. The Bluetooth
receiver of your PR / 01 incorporates 64215 AptX. Reference codec to listen to high
definition music wirelessly. To use this connection, you just have to:
1.
Turn the PR / 01 on.
2.
The Bluetooth
is the default source and will automatically turn ON. The LED light
®
on the PR / 01 will start to flash rapidly in white.
3.
Activate the Bluetooth
functionality on your device (computer, tablet or
®
smartphone).
4.
Press the pair button on PR/01.
5.
On your device, select the PR / 01 in the list.
6.
The LED light will turn to a steady white.
7.
You can now control your playlists from your source (computer, tablet or smartphone)
in a radius of about 10 metres around your PR / 01.
®
64215 AptX. This
®
1 5
Publicité
Table des Matières
