GreenWorks Commercial GT 160 Mode D'emploi page 20

OPERATION
5. Insert the ends of the lines through line exit holes in the sides of the cover.
Line exit hole
6. Reinstall the spool and cover onto the trimmer head. Push until cover snaps into place.
LINE REPLACEmENT (See Figure 11.)
1. Line up the slots on the spool cap with the slots on the string head.
2. Insert line through the string head hole. Push line until it exits the opposite string head hole.
Spool cap
String head
Slots
Cover
20
Fig. 10.3
Fig. 10.4
Slots
Fig. 11.1