GreenWorks Commercial GT 160 Mode D'emploi page 15

OPERATION
INsTALLINg THE BATTERY PACK (See Figure 5.)
• Insert battery pack into tool until an audible click is heard.
REmOVINg THE BATTERY PACK (See Figure 5.)
• Depress the battery release button (1) in the back of the battery pack and pull battery pack out
of tool.
sTARTINg AND sTOPPINg THE TRImmER (See Figure 6.)
• Ensure a fully charged battery is installed into the string trimmer.
• To start the string trimmer, press and hold the safety lock button (1) and squeeze the switch trigger
(2).
• To stop the string trimmer, release switch trigger to stop.
1
15
Battery release button
Fig. 5
2
Fig. 6