Eurotops WS8120 Guide D'utilisation page 8

Press SET again, "YEAR" appears and "2019" flash, press + or – to set year.
6.
Press SET again, "MONTH" appears and month digit "1" flash, press + or – to set month.
7.
Press SET again, "DATE" appears and date digit "1" flash, press + or – to set date.
8.
Press SET again, "D" and "M" flash, press + or – to select M/D (Month-Date) or D/M (Date-
9.
Month) calendar display.
Press SET again, "ENGLISH" flashes, press + or – to select the language of weekday in :
10.
ENGLISH (default) / DEUTSCH / FRENCH / ITALIAN / SPANISH / HOLLAND / FINNISH /
SWEDISH.
11. Press SET once again to confirm. Your clock will return to normal time display mode in around
10 seconds if no further press of any other buttons.
Notes:
Press and hold + or – to accelerate setting process.


The clock will exit the setting mode and return to normal time display if no buttons are pressed
for 10 seconds.
TO SELECT TEMPERATURE CELSIUS OR FAHRENHEIT
During normal time display, press "– " once to select temperature display in °C or °F.
TO SELECT THE DISPLAY OF TEMPERATURE AND HUMIDITY OR THE YEAR
At normal mode, press "+" once to show the year, press "+" once again to return to the temperature
and humidity display.
TEMPERATURE AND HUMIDITY DISPLAY
LOW BATTERY INDICATOR
The low battery indicator
with new Alkaline batteries.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which maybe caused by electro-
static discharge or other interference, slide open the battery cover, take out the batteries and reinstall
them by observing the correct +/- polarity. Your unit will be reset to default settings and you need to
set it again.
CARE OF YOUR PRODUCT
1. Place your unit on a stable surface, away from sources of direct sunlight or excessive heat or
moisture.
2. Protect your furniture when placing your units on a natural wood and lacquered finish by using a
cloth or protective material between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such
as Benzine, thinner or similar materials can damage the surface of the unit.
4. If the unit is not to be used for a prolonged period, such as a month or longer, remove the
batteries to prevent possible corrosion. Should the battery compartment become corroded or dirty,
clean the compartment thoroughly and replace the batteries.
will appear between the time digits when the batteries are low. Replace
YEAR DISPLAY
EN3