Publicité
Les langues disponibles
Les langues disponibles
OPERATING MODE
Use the navigation key
to display the operating mode bar.
Move the selection field to the required menu, and push the key
to activate the operating
mode chosen.
Comfort manual mode
The Comfort mode maintains the comfort temperature throughout the day.
To set the comfort temperature, use the
or
keys.
To view the setting push the key
. Push the key
again to display the measured temperature
again (thermometer icon).
ECO manual mode
The ECO mode maintains a low temperature level throughout the day.
To regulate the temperature, use the key
or .
To view the setting, push the key
. Push the
key again to display the measured temperature
again (thermometer icon).
Automatic mode
The system follows the selected program, based on the current time. This program comes in two
versions:
• Predefined program (from P1 to P9)
• Program created by the user (from U1 to U4).
To view the time, push the key
. When the key
is pushed twice in succession, the value set
is displayed. If the
key is pushed again, the temperature measured is displayed again (thermom-
eter icon).
Temporary departure from mode
If the program's current setting is edited using the
or
keys, a departure is activated. The cur-
rent setting will no longer be applied and the manual departure pictogram will be displayed. The
program will return to its normal setting, at the start of the next phase.
Advance heating in ASC mode
By heating in advance, the temperature for the subsequent comfort level can be reached (see the
"Special Functions" paragraph). When this advance is done, the
pictogram appears. On com-
pletion of the advance heating, the
pictogram is no longer displayed.
[ 36 - EN ]
Publicité
