General Use - Inventum GK010 Mode D'emploi

4

general use

The control unit of the appliance is located on the outside. Check that the voltage corresponds with what is stated on the
information plate and insert the plug in the socket.
Important: the operating panel will only light up when a key is pressed or one of the doors is opened. The rest of the time
the operating panel will be standby and not light up.
Important: the operating panel locks automatically -
lock for 3 seconds until the lock disappears from the operating panel.
Instruction: the recommended temperature setting lies between 0°C and 4°C for the cooler section, and between -18°C
and -24°C for the freezer section.
Instruction: The ambient temperature, the frequency of opening the door and the position of the appliance have an effect
on the temperature in the appliance. Take this into account when setting the thermostat.
1
2
OPERATING PANEL
1. key for setting the freezer temperature
2. key for selecting a function
3. key for setting the cooler temperature
4. key lock
5. on/off key for the ice and water dispenser
6. selection key for ice cubes/crushed ice/water/filter set
SETTING THE TEMPERATURE OF THE FREEZER SECTION
On the operating panel, press FRZ. TEMP to change the temperature of the freezer section. The temperature of the freezer
section can be set between -16°C and -24°C.
Press FRZ. TEMP until the required temperature is shown on the display. While setting the temperature, the indication
flashes on the display. After setting the temperature, the operating panel is locked automatically and after approximately 30
seconds the display switches off.
The temperature of the freezer section is shown on the display when one of the doors is opened or a key is pressed.
SETTING THE TEMPERATURE OF THE COOLER SECTION
On the operating panel, press REF. TEMP to change the temperature of the cooler section. The temperature of the cooler
section can be set between 2°C and 8°C.
Press REF. TEMP until the required temperature is shown on the display. While setting the temperature, the indication
flashes on the display. After setting the temperature, the operating panel is locked automatically and after approximately 30
seconds the display switches off.
The temperature of the cooler section is shown on the display when one of the doors is opened or a key is pressed.
After setting the temperatures, the appliance continues to cool until the set temperatures have been reached. Allow the
appliance to reach the required temperature with no food. Usually this will take 2 to 3 hours. After this, you are able to fill the
appliance with food.
If the ambient temperature rises, set the appliance to a lower temperature position in order to be able to guarantee the
interior temperature.
5 6
. In order to change the temperature or a function, press the key
3
4
E
DISPLAY
A. Temperature indication of the freezer section
B. Temperature indication of the cooler section
C. Quick freeze symbol
D. Quick refrigeration symbol
E. Holiday mode symbol
F. Water filter
G. Switching water and ice dispenser on/off
H. Ice cube selection
I. Crushed ice selection
J. Cold water selection
K. Key lock symbol
A C D
F G H I J
English
B
K
31
•