Use - Inventum CD010 Mode D'emploi

4

use

The control unit of the appliance is located on the outside. Check that the voltage corresponds with what is stated
on the information plate and insert the plug in the socket.
Important: the operating panel will only light up when a key is pressed or one of the doors is opened. The rest of the time
the operating panel will be standby and not light up.
Important: the operating panel locks automatically -
lock for 3 seconds until the lock disappears from the operating panel.
Instruction: the recommended temperature setting lies between 0°C and 4°C for the cooler section, and between -18°C
and -22°C for the freezer section.
Instruction: The ambient temperature, the frequency of opening the door and the position of the appliance have an effect
on the temperature in the appliance.
Take this into account when setting the thermostat.
OPERATING PANEL
1. key for setting the cooler temperature
2. key for setting the freezer temperature
3. key for super cooling or super freezing or the holiday mode
4. key lock
DISPLAY
A. Temperature indication of the cooler section
B. Temperature indication of the freezer section
C. OFF symbol
D. Super cooling symbol
E. Super freezing symbol
F. Key lock symbol
G. Holiday mode symbol
SETTING THE TEMPERATURE OF THE COOLER SECTION
Press on the operating panel to change the temperature of the cooler section. The temperature of the cooler
section can be set between 1°C and 7°C.
Press until the required temperature is shown on the display. While setting the temperature, the indication
flashes on the display. After setting the temperature, the operating panel is locked automatically and after approximately
30 seconds the display switches off.
The temperature of the cooler section is shown on the display when one of the doors is opened or a key is pressed.
After setting the temperatures, the appliance continues to cool until the set temperatures have been reached.
Allow the appliance to reach the required temperature with no food. Usually this will take 2 to 3 hours. After this, you are
able to fill the appliance with food.
If the ambient temperature rises, set the appliance to a lower temperature position in order to be able to guarantee
the interior temperature.
SETTING THE TEMPERATURE OF THE FREEZER SECTION
Press on the operating panel to change the temperature of the freezer section. The temperature of the freezer
section can be set between -16°C and -22°C.
Press until the required temperature is shown on the display. While setting the temperature, the indication
flashes on the display. After setting the temperature, the operating panel is locked automatically and after approximately
30 seconds the display switches off.
The temperature of the freezer section is shown on the display when one of the doors is opened or a key is pressed.
24
• English
. In order to change the temperature or a function, press the key
A B
C
D
E
1
2
3
4
F
G