Pattern - Lorex LZV2622 Serie Manuel D'utilisation

5 Controlling the PTZ Camera with your MPX DVR
NOTE
• There is a 5 second minimum pause between presets.
• Tour panning / tilting speed is slower than manual panning / tilting speed. The reduced speed maxi-
mizes reliability.
• The camera's full panning range is 355°. However, we recommend you do not make the camera pan
more than 270° between any two points in a tour.

5.2.3 Pattern

Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Click to open the PAN/TILT/ZOOM menu.
2. Click the Pattern tab.
3. Under Pattern, enter the pattern you would like to configure.
4. Move the camera into the desired start position and click Begin.
5. Move the camera into the desired end position and click End.
6. Right-click to return to the advanced PTZ controls window.
To run a pattern:
• Under No., select the number of the pattern you would like to go to and click
NOTE
• The camera's full panning range is 355°. However, we recommend you do not make the camera pan
more than 270° between any two points in a pattern.
• For instructions on how to control the PTZ camera using the smartphone or tablet app, refer to your 's
instructional manual.
#LX400075; r.41474/44767; en-US
.
16