Télécharger Imprimer la page

Honeywell HEATBUD XL Manuel Du Propriétaire page 6

Publicité

Les langues disponibles

Les langues disponibles

CLEANING
We recommend that the heater be cleaned at least once a month and before off-season storage.
Turn the heater OFF and unplug it. Allow it to cool.
Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES, POLISHES
OR ANY CHEMICAL SOLUTION.
STORAGE
Clean your heater using the above-mentioned steps. Wrap the cord around the unit. Place in its original box and
store it in a cool, dry place.
TROUBLESHOOTING
If your heater shuts off unexpectedly or fails to operate, one of your heater safety features may have been
activated to prevent overheating.
Be sure it is plugged in and that the electrical outlet is working.
Check for any obstructions. If you find an obstruction, turn the heater OFF and unplug it. Allow the heater to cool
completely, then remove the obstruction. Wait at least 10 minutes, then plug the heater back in and follow the
OPERATION instructions.
PRODUCT SPECIFICATIONS
Model
Unit dims
Amps
Unit Voltage
Max Watts
Max BTUs
NOTE: Because the Low setting does not require as much electricity to operate, it is more energy efficient
and may be a better option if you are concerned about the higher power consumption when the heater is on
the High setting.
HCE210 & HCE220 Series
7.8" L x 4.8" W x 8.2" H (19.8 cm L x 12.2 cm W x 20.8 cm H)
12.5
120V, 60Hz
1500 Watts
5118
6

Publicité

loading

Ce manuel est également adapté pour:

Heatbud xl plus