Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

ELECTRIC SHOCK HAZARD
The unit must be electrically grounded. Use only on
GFCI protected receptacles.
Connect to a properly grounded outlet only. Do not cut
off the grounding prong. Do not use with an adapter.
Do not use with extension cords.
Do not use with damaged cord or plug. If unit is not working as
it should, has been dropped, damaged, left outdoors, or
exposed to water, return it to an authorized service center for
repair.
Unplug cord from outlet when not in use or when servicing unit.
ELECTRIC SHOCK HAZARD
Keep motor and electrical parts dry.
Do not use outdoors. For indoor use only.
Do not handle plug or unit with wet hands.
Do not operate unit in standing water.
BREATHING HAZARD
When using the HEPA 700 in a containment area, turn
off all sources of power to open combustion
appliances such as fireplaces, boilers, furnaces, water
heaters and HVAC systems to avoid the risk of backdrafting
deadly carbon monoxide fumes.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful
Parts Identification
Filter cover buckle
(×4). Release to
replace filter
elements.
Air intake
ring. Attach
14 in. semi-
rigid ducting.
Inlet and
inlet cover.
Remove
cover before
operating.
125385F HEPA 700
Quick Start Guide
HEPA 700 Air Scrubber
Control panel.
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for
help
SPECIAL FEATURES
Command Hub Technology
Integrated Command Hub technology with the free Command
Center mobile app enables firmware updates and 24/7
monitoring and control to ensure optimal air filtration. (App
available in Apple and Google Play stores.)
Ducting options
Inlet: 14 in. wire reinforced ducting (purchased separately).
Outlet: 14 in.(diameter) layflat or wire reinforced ducting
(purchased separately) using the provided duct attachment
ring. Do not exceed a maximum ducting length of 25 ft. / 7.6 m.
OPERATING INSTRUCTIONS
Setup
1. Unwrap the cord completely.
2. Place the HEPA 700 with the handle up. Ensure that neither
the inlet nor the outlet are obstructed.
3. Plug into a standard 115V GFCI-protected outlet.
Carry handle.
Folds down when
not in use.
Feet for
horizontal
operation &
stacking.
115V outlets
(×2) and
breaker reset
switch.
1
Filtered air
outlet. Filter
retainer ring may
be used to
attach 14 in.
layflat ducting.
Legend Brands, Inc.

Publicité

loading

Sommaire des Matières pour Dri-Eaz HEPA 700

  • Page 1 1. Unwrap the cord completely. residential installation. This equipment generates, uses and 2. Place the HEPA 700 with the handle up. Ensure that neither can radiate radio frequency energy, and if not installed and the inlet nor the outlet are obstructed.
  • Page 2 MAINTENANCE About the filters Prefilter Option 1: One 2-inch filter IMPORTANT: Use Legend Brands HEPA 700 filters only HEPA filter (see Filter Options below). Using other filters will reduce filtration effectiveness. Prefilter Option 2:...
  • Page 3 Guide de mise en route rapide – HEPA 700 Cet équipement a été mis à l’essai et s’est avéré conforme aux seuils établis pour un appareil DANGER DE DÉCHARGE ÉLECTRIQUE numérique de classe B, conformément à la partie 15 L’unité doit être électriquement mise à la terre.
  • Page 4 Un (1) filtre de 2 po Prises électriques Filtre HEPA Vous pouvez connecter jusqu'à huit (8) HEPA 700, à la vitesse la plus basse, sur un circuit de 15 ampères; Option de préfiltre 2 : quatre (4) à la vitesse la plus élevée.
  • Page 5 Tecnologia de Command Hub integrada con la aplicacion PELIGRO RESPIRATORIO mobil gratis de Command Center habilita actualizaciones de Cuando utilice el HEPA 700 en un área de contención, firmware y vigilancia y control 24/7 para asegurar filtracion de aire optima.
  • Page 6 HEPA 1. Desenvuelva completamente el cordón. lengüetas con muescas (×4) 2. Coloque el HEPA 700 con el mango hacia arriba. Asegúrese de que ni la entrada ni la salida estén obstruidas. 3. Enchúfelo a una toma de corriente estándar de 115V Tapa del filtro con protección GFCI.