Unpacking Instruction; Powersupply; Control - Audizio MILAN Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts
are present, and have been received in good condition. Notify the shipper immediately and retain packing material for
inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and
all packing materials. In the event that the product must be returned to the factory, it is important that the product be
returned in the original factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately.
The arising condensation water might damage your device. Leave the device switched off until it has reached room
temperature.

POWERSUPPLY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the
mains voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product
must also be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.

CONTROL

1. Power / Volume control
Rotate clockwise to power on the radio. Rotate anti-clockwise to power off. Increase / decrease volume level.
2. Standby on /off
3. Mode
Toggle to switch between DAB and FM.
4. Scan
DAB - Press to full scan
FM - Press to scan the next station
Press and hold to initiate auto scan.
5.
(Preset)
Press and hold to enter list of preset store. Press to recall the preset list.
6. Info/Menu
Press and hold the button to enter the main menu, press it briefly to cycle through the information broadcasted by
the radio station.
7. Sleep
Press to enter sleep timer selection.
8. Preset button 1 / 2 / 3
Dedicated preset button no. 1-3 Press and hold to preset the channel. Press briefly to recall
9. Speaker
10. 2.4" color TFT screen
11. Tune / Select
Press to confirm / rotate the knob to browse the item from the list or adjust the radio frequencies.
12. Telescopic Antenna
13. Battery charging indicator
14. DC IN 5V
Micro USB charging port / connect with DC power adaptor comes with micro USB connection
15. Line out
16. Earphone jack
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

102.210102.212102.214

Table des Matières