Floureon Economic AHD Serie Manuel De L'utilisateur page 8

[Connection Mode] Single connection and multi-connection, multi-connection can connect to several
devices, device will be displayed on by one , tourinterval can be set, no less than 10s; single channel
can only connect to one monitoring device.
[Add] Click add , the following interface will be seen：
[Search]: Search and display the IP address within the same LAN, such as IPC, AHD and NVR.Choose
one IP address, device name, type, IP address, port and protocol will be entered automatically.
[Protocol] Support NETIP , ONVIF and all. Default is all.
[OK]: Click OK to finish adding, go back to digital channel interface, choose added monitoring device
to preview.
Lan Access
When connected to the network, login AHD to start remote monitoring via IE browser
1. DVR connection
Open IE-Browser, enter IP address, take192.168.1.10 as example, input http://192.168.1.10 to connect
2. DVR Login
Enter user name and password. (default user name is admin, no password). Change the administrator
password timely after login, as follows:
Note: Plug-in need to be installed if you login via IE browser.
IE is default to intercept plugin. Please set IE security level.
Go to [Internet options]>[Security]>[Custerzed Level]>[ActiveX],enable them all. Or go to our official
website to download and install plug-in (http://www.xmeye.net)
EN-6