Technical Data; Installation; Operation Instruction - Kalorik PRO B60A Manuel De L'utilisateur

Technical Data

Bowl Capacity (dm³) Mixing Speed (r/min) Rated Voltage (V) Rated input Power (W)
60

Installation

♦
The machine must be put on a dry and flat surface, and make sure the machine is steady.
♦
You can use four screws to fix the bracket, so the mixer will not shake or slope.
♦
Check whether the power voltage is suitable for voltage of this mixer or not before use, and
whether the ground wire is firm or not.
♦
When the motor of this machine is equipped with 380V, you can ask the professional
electricians to fix the electrical source. If you find that running direction is not right, you can
change the two wires, besides the ground wire.
Warning: users must install the shell ground wire.

Operation Instruction

OFF
3
2
1
82/155/326
Before using, please check if the power supply matches
your machine and be sure the ground wire is connected.
Before testing, please take mixing device off first, in
order to avoid damage to machine which is match moving
direction. It's necessary to change the three-phase
machine if the moving direction does not match with arrow.
For changing the speed: Please stop machine first before
changing speed in order to avoid damaging gear box.
Mixing: according to the different mixing material.
Choose the different mixing devices and speed.
3: Be suitable for mix and stir butter, eggs, and work with
in high speed, working time is less than 15 minutes.
2: Be suitable for mix and stir stuffing and raw material,
and work in middle speed, working time is less than 20
minutes.
1: Middle position is suitable for mixing dough, working time
is less than 20 minutes. Flour-water quantity is 40%-50%.
- 3 -
380 - 415 ~ 2200