Tre Spade MNS0022 Mode D'emploi page 11

We remember that the disposal of the exhaust oil
must follow the rules in force (not scattered to the
environment).
ACCIDENTAL STOPPING
If the machine stops accidentally during the
processing operation, before investigating
the reasons for this failure, it is necessary to
stop at once the supply of electric current to
the motor by setting the switch at O. Then
the electric flex should be disconnected from
the socket.
After that:
•
if the stop is caused by lack of electric current
supply due to a failure in the electricity network,
do not reconnect the machine to the socket un-
til normal conditions have been restored in the
network.
•
if the stop is due to overstress, disassemble the
cutting unit after removing it from the motor as-
sembly and then eliminate the reasons for the
stoppage.
•
in case the inconvenience is due to reasons con-
nected with the power unit, contact the dealer
to arrange for the machine to be checked, if nec-
essary, by the manufacturer.
TRE SPADE TRE SPADE Made in Italy Made in Italy