NGS ARTICA PRIDE Mode D'emploi page 4

USER'S MANUAL
PAIRING EARPHONES WITH
BLUETOOTH DEVICES
• Please keep the headset and mobile phone within 1 meter
when pairing.
• Make the headsets enter pairing mode.
Function Operation
Enter pairing Make sure the
mode earphones are turned
off, if not, please turn
it off first. Press the
multifunction button
about 5 seconds, and
release it till blue light
and red light blink
alternately.
Accept / end Press the
call multifunction button
briefly
Start / pause Press the
music multifunction button
briefly
4
• Activate your mobile phone's Bluetooth function and
search Bluetooth devices within available range, and select
"NGS ARTICA PRIDE" from the list of devices shown after
search.
Indicator light
• After successfully connecting, the headphone light turns
blue.
Blue light and
Red light blink
Note:
alternately.
• If the pairing is not successful, please switch off headset
firstly, and then re-pair according mentioned above.
• After pairing is successful, the headset and the mobile
phone will remember each other, they will no need to re-
pair next time.
• If you want to pair the headset with other devices, please
pair it with the new device according mentioned above.