Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51
Effective usage of Speedlight

Notes on bounce flash

For a simple bounce flash technique, tilt the flash head upward and
En
bounce the flash light off the ceiling. Note that the flash should not
directly illuminate the subject.
White ceiling
• The recommended distance between
the flash head and reflective surface
(ex. ceiling) is 1 to 2m (3.3-6.6 ft.).
• Note to prevent the flash light directly
illuminating the subject.
• In color photography, select white or
highly reflective surfaces to bounce
the light off. Otherwise, your pictures
will come out with an unnatural color
cast similar to that of the reflecting
surface.
16
60º 75º 90º
1-2m
• When the distance between the flash
Lightproof white paper
head and reflective surfaces is long,
use some A4-size white paper to
bounce the light off. Check that the
bounced light rightly illuminates the
subject.

Publicité

Table des Matières
loading

Table des Matières