DESCRIPTION
AMC250 is a local reception amplifier unit to fit a 2 unit 19" rack, with an analog audio input and
digital audio input that accepts all standard formats (AES/EBU, S/PDIF, IEC958 ) up to a resolution of
24 bits and a maximum sampling frequency of 96 KHz.
Volume and balance control by VCA.
Phasemeter on LED bargraph for a complete monitoring of the modulation.
LED peakmeter (dBu for analog, dBFs for digital).
Headphone output on the front panel (6.35mm jack, with automatic switching of speakers).
Mute by remote control.
Analog balanced inputs available on the front and rear panel.
XLR balanced input (AES/EBU 110 Ohms) / AES/EBU 110 Ohms output available on the front and
rear panel.
Remote control on female DB9 connector (Volume and Mute).
Volume control, either on front panel or by remote potentiometer.
APPLICATION
Local monitoring (bay mounted).
BLOCK DIAGRAM
PUSH
IN L ANALOG
REAR PANEL
PUSH
IN L ANALOG
FRONT PANEL
PUSH
IN R ANALOG
REAR PANEL
PUSH
IN R ANALOG
FRONT PANEL
PUSH
AES/EBU IN
REAR PANEL
PUSH
AES/EBU IN
FRONT PANEL
AES/EBU OUT
REAR PANEL
AES/EBU OUT
FRONT PANEL
Rami
RFI
-
+
RFI
RFI
-
+
RFI
RFI
Decoder
RFI
RFI
DAC
RFI
ANALOG
DIGITAL
Bal
RFI
RFI
Connect
for Ext-gain
Ext-gain
Control
10
+
VCA
Mute
Mute
Vol
+
VCA
Mute CTRL
Ext
VCA
Ctrl
Ext Mute
PHASEMETER
PEAKMETER
PHONES
AMC250