Rami GEM 808 Manuel Utilisateur page 18

11
12
13
11)
Output 1 order key.
Same for output 2 to 8.
12)
Order key to all outputs.
13)
Power on indicator.
14)
Electronically balanced Micro input, female 3 pins XLR socket. (1 ground , 2 signal +, 3 signal -)
15)
Microphone input level pot.
16)
Led peak meter, displays CUE level.
17)
Mute transitory key associated to an indicator. Mute cancels all inputs towards outputs (i.e during a pause
while recording or broadcasting) To avoid mistakes, the mute is enabled after a 3 seconds continuous action
on the key. The led indicator, blinks during action on the key, then lights continuously. Cancel with just one
pressure on the key.
18)
Memory 1 to 14 selection transitory key with light indicator.
Used with the save key, saves into the selected memory
Used alone, selects the memory.
19)
" Save " transitory key with light indicator. Pressing saves into memory.
To save, press "Save" and memory number "1"(or "2" or "3" or "4").
"save" led blinks.
When the led is on the memory is saved.
Note : If the led does not light, saving is aborted. Try to do it again.
20)
Transitory key with light indicator, used to send CUE to output 8. When no CUE is enabled the mix is available
on output 8. One or more Cue overcome the mix.
21)
¼ inch headphone 8 socket
ENGLISH
FRONT PANEL DESCRIPTION
ORDER MIC ORDER
PUSH
TO 1
14
TO 2
15
TO 3
0 0 10 10
SENSITIVITY
L R
+15 +15
TO 4
+12 +12
+9 +9
16
+6 +6
+3 +3
0dB 0dB
-3 -3
TO 5
-6 -6
-9 -9
-12 -12
PEAKMETER
TO 6
MUTE
17
TO 7
1
2
18
TO 8
3
4
TO ALL
19
SAVE
20
ON
CUE 8
21
18
GEM 808 - RAmi