Publicité
Les langues disponibles
Les langues disponibles
10)
Order key to output 1.
Same for outputs 2 to 6
11)
Order Key to all outputs
12)
Power on indicator.
13)
Electronically balanced Micro input, female 3 pins XLR socket. (1 ground , 2 signal +, 3 signal -)
14)
Microphone input level pot.
15)
Led peak meter, displays CUE level.
16)
Mute transitory key associated to an indicator. Mute cancels all inputs towards outputs (i.e during a
pause while recording or broadcasting) To avoid mistakes, the mute is enabled after a 3 seconds
continuous action on the key. The led indicator, blinks during action on the key, then lights
continuously. Cancel with just one pressure on the key.
17)
Memory 1 to 14 selection transitory key with light indicator.
Used with the "save" key, saves into the selected memory.
Used alone, selects the memory.
18) "
Save " transitory key with light indicator. Pressing saves into memory.
To save, press « Save » and memory number "1"(or "2" or "3" or "4").
"save" led blinks
When the led is on the memory is saved.
Note : If the led does not light, saving is aborted. Try to do it again.
19)
Transitory key with light indicator, used to send CUE to output 8. When no CUE is enabled the mix is
available on output 8. One or more Cue overcome the mix.
ENGLISH
FRONT PANEL DESCRIPTION
ORDER
MIC ORDER
PUSH
10
TO 1
SENSITIVITY
TO 2
0
L
+15
TO 3
+12
+9
+6
+3
0dB
-3
TO 4
-6
-9
-12
TO 5
MUTE
1
2
TO 6
3
11
4
TO ALL
SAVE
12
ON
CUE
13
14
10
R
15
16
17
18
19
6
18
GEM 606 - RAmi
Publicité
