Important - Mastervolt Battman Ii Mode D'emploi

BATTMAN II BATTERY MONITOR
4 ... and then secure it in place from behind.
MOUNTING ALTERNATIVES WITH EXTRA AC-
CESSORIES
Instrument housing for external mounting, part no.
240 059 007 001. Front ring, part no. M 200 052.
8
neg. -
pos +
yellow
brown
BATTMAN
black
grey
blue
Only negative
F
shunt
1 Connect the cable to the shunt as indicated.
2 Connect the shunt to the negative (-) battery pole.
3 Connect the red wire to the (+) positive pole.
4 Connect as indicated in the diagram the display
(backlight) to the delivered on/off switch.
REMARK: Please do not connect the backlight
to the instrument connection.

IMPORTANT:

Between battery pole and shunt no
DC consumers may be connected.
All consumers have to be connected
to the bold indicated with F. Maxi-
mum load is 100A (continue), peak
load of 500A are permitted.
November 1996 / BATTMAN II / EN
+ bat.
switch for backlight
push button
red
fuse 1A