Product Profile; Important Safety Instructions - Fellowes SB-80 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8

Product Profile

This product is built to shred paper, staples, small paper clips,
credit cards, CDs and DVDs. It is not built to take large paper
clips, continuous forms, adhesive labels, transparencies, newspaper,
cardboard or any plastic other than credit cards. Using it for these
purposes is likely to cause irreparable damage.
Sheet capacity*
Paper shred size
CD/DVD capacity
Maximum paper width
Recommended daily capacity
Maximum running time
Automatic cool-down period
Voltage (220-240V/50Hz)
*Based on A4 (70gsm) paper with shredder operating at rated voltage; heavier paper, high humidity, or other than
rated voltage may reduce sheet capacity.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING
While setting up shredder
• Check shredder for damage or defects; some paper particles in the basket are normal
due to product testing and does not indicate a defect.
• If the cord is damaged do not replace cord or use the machine. Return machine for a
replacement.
• Avoid touching exposed blades on underside of SB-85C confetti-cut shredder head.
• Plug power cord in an outlet that can easily be reached.
• Do not place shredder near or over a heat or water source.
While operating shredder
• Keep hands and hanging objects (jewelry, ties, loose clothing,
long hair, etc.) away from paper entry.
• Keep children and pets away from the shredder.
When not in use
• To turn the safety lockout feature (3) on, slide the switch to the back. To
unlock slide the switch to the front. When the shredder is locked the yellow
light is on. This feature electronically overrides the on/off power button for
shredder function.
• Always turn off and unplug shredder.
• Unplug before emptying basket.
• Do not open shredder head: Danger of electric shock.
NOTE: Do not use flammable synthetic oil, petroleum-based products
or aerosols of any kind on or near product at any time.
Strip-cut
Strip-cut
SB-80
SB-80
18 sheets
16 sheets
5.8 mm
3.9 mm
1
1
229 mm
50-100 shredding passes
20 minutes
30 minutes
1.5A
1.5A
Confetti-cut
SB-85C
15 sheets
3.9 x 38 mm
1
2.5A
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sb-85c

Table des Matières