Transport And Storage - Wolf Garten LYCOS 40/480 V Mode D'emploi

EN
Cleaning
Keep the ventilation slots clean and free from
Î
dust.
Wipe down the casing only with a damp cloth.
Î
Attention!
Do not clean the device with water.
Cleaning the vacuum bag
After using the device, always empty and shake
Î
out the dust bag.
Note
Wear protective goggles and a dust mask
for this task.
Once per month (or more often if required) wash
Î
the vacuum bag:
• Empty the vacuum bag thoroughly
• Turn the vacuum bag inside out
• Shake out vacuum bag
• Clean vacuum bag with a soap solution
• Leave the vacuum bag to dry
Cleaning the blowing/vacuum turbine B N
Undo the fixing screw on the casing B .
Î
Pull the entire blowing/vacuum tube assembly
Î
away from the casing B .
Remove deposits, soiling or clogging with a brush,
Î
a dry cloth or compressed air N .
• Press the entire blowing/vacuum tube assembly
onto the casing, until it locks into place B .
• Fasten the complete blowing/vacuum tube with
the previously released screw back on to the
casing B .
24

Transport and storage

Transport
Secure the device sufficiently to prevent its unin-
Î
tentional slipping if you are transporting it in or on
a motor vehicle.
Storage
Thoroughly clean your device at the end of each
Î
season.
Always store the device in a dry and safe location
Î
that is inaccessible to children.
Store the power pack and tool separately.
Î
Store the power pack in a cool and dry location.
Î
Recommended storage temperature 0 - 23°C.
Keep the device and especially its plastic com-
Î
ponents away from brake fluids, petrol, mineral
oil containing products, penetrating oils etc. They
contain chemical substances that can damage,
attack or destroy the plastic components of the
leaf vacuum/blower.
Fertilizers and other garden chemicals contain
Î
substances that may have a highly corrosive ef-
fect on the metal parts of the device. Therefore do
not store your device near to these substances.
Transport and storage