Safety - GMC-I PRO SyS CP 30 Mode D'emploi

1. SAFETY

The following symbols appear on the products:
To avoid electric shock:
• Use caution during installation and use of this
product; high voltages and currents may be present
in circuit under test.
• This product must be used only by qualified
personnel practising applicable safety precautions.
• Do not use product if damaged.
• Always connect probe to display device before it is
installed around the conductor.
• Always ensure the probe is removed from any live
electrical circuit, and leads are disconnected before
removing the battery cover.
• Do not hold the probe anywhere beyond the tactile
barrier see FIG 1.
Do not dispose of this product as unsorted
municipal waste.
recycler for disposal.
Attention! Refer to Manual
Double/Reinforced Insulation
Application around and removal from
HAZARDOUS LIVE conductors is
permissible
Complies
standards
Read all instructions completely before
using this product.
Underwriters' Laboratory Inc.
recognised component
3
Contact a qualified
with the relevant European