Campbell Hausfeld TL0517 Instructions D'utilisation page 7

Impact Mechanism Troubleshooting Guide
Symptom
Impacts slowly or will not
impact
Impacts rapidly but will not
remove bolts
Does not impact
Notes
Possible Cause(s)
1. Lack of lubrication
2. Tool regulator set in wrong position
3. In-line regulator or compressor
regulator set too low
1. Worn impact mechanism
1. Broken impact mechanism
Corrective Action
1. Lubricate the air motor and the impact
mechanism. (See Lubrication section of
this manual)
2. Adjust the regulator on the tool to the
maximum setting
3. Adjust regulators in the air system
1. a. Replace worn impact mechanism
components
b. Return impact wrench to Authorized
Service Center for repair
1. a. Replace broken impact mechanism
components
b. Return impact wrench to an Authorized
Service Center for repair
7
TL0517
www.chpower.com