Restoring The Default Settings - REMEHA iSense Guide D'utilisation

Changing an existing clock program
1. Select Menu > Program > Clock prog. > Change.
2. Go to the day for which you want to change the clock program.
Press button C to confirm.
3. Go to the time you want to change. Press button C to confirm.
i
You can use the button to remove the selected switch time.
4. Use button C to set the time and the corresponding desired temperature.
5. Once you have set all switch times for a particular day, you can copy the settings for that day to
other days:
- Go to the day.
- Press Copy.
- Select the day(s) to which you want to copy the settings using button C and press Save.
6. Go to the day. Then press button C.
7. Go to step 2 to set the next day, or press Back to close this menu.

Restoring the default settings

Select Menu > Program > Clock prog. > Factory settings to restore the settings for the default
clock program.
EN
58