HappyCook SP4X Mode D'emploi page 21

SIGNS OF DAMAGE AND THE APPLIANCE IS NOT TO BE USED IF
THE CORD IS DAMAGED.
 FOR THE DETAILS ON HOW TO CLEAN SURFACES IN CONTACT
WITH FOOD, PLEASE SEE SECTION "CLEANING AND
MAINTENANCE".
 AFTER UNPACKING THE APPLIANCE, MAKE SURE IT IS NOT
DAMAGED. IN CASE OF DOUBT, DO NOT USE THE APPLIANCE
AND CONTACT YOUR SUPPLIER OR A QUALIFIED TECHNICIAN.
 THE
USE
RECOMMENDED BY THE MANUFACTURER MAY CAUSE
INJURIES.
 THE APPLIANCE MUST NOT BE USED IF IT HAS BEEN DROPPED,
IF IT HAS ANY VISIBLE DAMAGE, IF IT LEAKS OR IF IT FUNCTIONS
ABNORMALLY IN ANY WAY.
 ALWAYS UNPLUG THE APPLIANCE IF NOT USING IT FOR A
PERIOD OF TIME.
 REMOVE ALL PACKAGING AND DO NOT LEAVE THE PACKAGING
MATERIAL SUCH AS PLASTIC BAGS, POLYSTYRENE AND ELASTIC
BANDS IN EASY REACH OF CHILDREN AS THEY MAY CAUSE
SERIOUS INJURIES.
 AFTER UNPACKING YOUR APPLIANCE, MAKE SURE YOU HAVE
PUT IT ON A FLAT, STABLE AND HEAT-RESISTANT SURFACE.
CHECK YOU HAD LEAVE ENOUGH SPACE BETWEEN YOUR
APPLIANCE AND SURROUNDING WALL TO LET THE AIR
CIRCULATE AROUND. THERE SHOULD BE AT LEAST 50CM ON
THE TOP AND 20CM ON SIDES APART FROM THE APPLIANCE.
 THIS APPLIANCE MUST BE EARTHED.
 CHECK THAT YOUR ELECTRICAL INSTALLATION IS SUFFICIENT
FOR SUPPLYING THIS APPLIANCE.
SAFETY CAUTIONS
OF ACCESSORY AND ATTACHMENTS
ENGLISH
NOT