Intex ZX300 Deluxe Manuel D'utilisation page 9

(178IO) ZX300 DELUXE AUTOMATIC POOL CLEANER ENGLISH SIZE: 4.875" X 7.25" PANTONE 295U 08/21/2020
SETUP INSTRUCTIONS (continued)
6.
Brush assembly. see fig. 6.
NOTE: Remove the brushes from underneath the device when
vacuuming large debris or leaves on the pool floor.
12
11
7.
from outside of the pool, connect the other end of hose with the
hose collar nut (9) to the auto pool cleaner water inlet. Vertically
insert the hose collar nut (9) into the water inlet, while pushing
down the hose collar nut, turn the hose collar nut clockwise to
tighten the hose. To remove the hose, while pushing down the
hose collar nut, turn the collar nut counter-clockwise. see fig. 7.
Water
press
inlet
S AVE THESE INSTRUCTIONS
13
Water outlet
clockwise direction
Page 9
178A
6
7
screw