Using The Lindy Vga Converter Plus; Lindy Vga Converter Plus Remote Control Button Functions - Lindy 32561 Manuel

Using the LINDY VGA Converter Plus

LINDY VGA Converter Plus Remote Control Button Functions

Picture
© LINDY ELECTRONICS LTD
Button Description of Function
This button is used to set the Brightness, Colour, Sharpness and
Mode
flicker on the monitor
Place the captured computer graphic data on to the TV screen. There
Pan
could be some minor differences between the TV and the monitor
Direction
displays so these buttons allow slight adjustments to be made.
This is a fast zoom function. This is divided into 6 quadrants. When
Area each corresponding key is pressed, the related portion will be
Zoom enlarged and it will occupy the full screen of the TV. This portion will
overlap the other portions.
Once the zoom function is used you must press the cancel area
Zoom Off
zoom button to revert to the normal display.
Produces a laser beam output (red in colour) to assist in pointing to
Beam
specific areas of your presentation
When used in conjunction with certain software such as Microsoft
Page Up
Powerpoint the user can set this button to go back a slide
Page When used in conjunction with certain software such as Microsoft
Down Powerpoint the user can set this button to go to the next slide
Spot Spotlight an area on the screen and then using the buttons move the
Zoom & spotlight over the area you require to highlight The horizontal Reveal
Horizontal is used to reveal from the top to the bottom of the screen, ideal for
Reveal presentations.
Spot Size
Use this button to increase or decrease the size of the spotlight and
& Reveal
to change the colour of the reveal.
Colour
Installation & Use English – English Guide Page 7