Installation; Connecting The Lindy Vga Converter To Graphic Video Output; Connecting The Lindy Vga Converter To A Computer Monitor; Connecting The Lindy Vga Converter To A Tv Or Vcr - Lindy VGA Converter Lite Installation Et Utilisation

Installation

Connecting the LINDY VGA Converter to graphic video output

♦
Turn off your computer and its peripherals
♦
Place the LINDY VGA Converter Lite next to your computer
♦
Connect the VGA Graphic output on your computer to the LINDY VGA Converter Lite
♦
Plug the end of the Y-cable marked "VGA CARD" into you computers PC Graphic output.
♦
Plug the end of the Y-cable marked "ENCODER" into the VGA Converter Lite

Connecting the LINDY VGA Converter to a computer monitor

♦
Connect the computer monitor to the LINDY VGA Converter Lite Y-cable connector marked
"MONITOR"
For Macintosh:
An optional PC to Mac adaptor may be required with some models of Macintosh monitors.
Special Note for Laptop users
Some notebooks or laptops with LCD display screens can't support simultaneous
LCD and external monitor display; you should switch the display to external monitor
port. Please check your computer documentation regarding how to enable the
external monitor port.

Connecting the LINDY VGA Converter to a TV or VCR

♦ Composite Video to TV
Connect one end of the Composite video cable into the LINDY VGA Converter Lite.
Composite Video connector and the other end into the Video input port on the TV.
♦ S-VHS to TV
Plug one end of the S-VHS cable into the LINDY VGA Converter Lite S-VHS connector and
the other end into the S-VHS input port on the TV.
♦ RGB SCART Video to TV
If you want to use special equipment that requires RGB SCART video output, connect the
RGB SCART cable to the RGB SCART Video Out connector.
♦ For VCR
If you want to use a VCR with a TV, connect one end of the Composite video cable to the
Composite Video connector on the LINDY VGA Converter Lite and the other end to the
Video input port of the VCR. You can use the S-VHS connector for better quality if your
VCR supports S-VHS. Also you can connect the VCR video output to a TV for video
monitoring.

Connecting the Power Supply

Connect one end of the power supply adapter to the power jack on the LINDY VGA
Converter Lite and the other end into a power source.
© LINDY ELECTRONICS LTD Installation & Use English – English Guide Page 5