Control Panel And Controls - Klarstein WHIRLWIND Mode D'emploi

CONTROL PANEL AND CONTROLS

This appliance can be operated by the control panel located on the top of the appliance
or by the remote control: Plug in and you would hear BiBi, the appliance is under
standby mode, you can only use ON/SPEED button.
ON/SPEED button
Under standby mode, press this key and the appliance starts from medium speed, then
changes to low speed within 3 seconds.
OFF button
Press this button to exit functions and enter into Standby mode.
COOLER/HUMIDIFIER button
Press this button to active Cooling/Humidifying function, the corresponding LED is on
simultaneously.
MODE button
Press the button once to switch from normal to natural Mode, press again to enter into
sleeping mode, Press for a third time to enter into normal mode. The LED lights change
accordingly.
• NORMAL mode: the appliance operates in selected wind speed: High, Medium,
Low.
• NATURAL mode: the appliance operates according to computerized intervals of
changing.
• SLEEPING mode: the appliance operates according to computerized intervals of
changing speeds.
EN
17