Weber GENESIS II E-330 Manuel Du Propriétaire page 11

b) If the leak is at any fittings indicated in
illustration (F), re-tighten fitting with a wrench
and recheck for leaks with soap and water
solution. If leak persists, turn off the gas. DO NOT
OPERATE THE GRILL.
c) If the leak is at any fittings indicated in
illustration (G), turn off the gas. DO NOT
OPERATE THE GRILL.
If a leak is present, contact the Customer Service
Representative in your area using the contact
information on our website.
4) If bubbles do not appear, leak checking is complete.
Turn gas supply valve off and rinse connections
with water.
NOTE: Since some leak test solutions, including soap and
water, may be slightly corrosive, all connections should
be rinsed with water after checking for leaks.
Disconnect the Hose from the Gas Supply
1) Slide the collar back and pull out the plug.
This automatically shuts off the gas.
F
G
11