Philips FC6053 Mode D'emploi page 12

12 ENGLISH
Problem Causes
If this problem is not caused
by any of the factors
mentioned above, please
contact the Philips Customer
Care Centre in your country.
The appliance The dust compartment is full.
does not
clean
floors/the
suction power
is low.
The batteries are not fully
charged.
The filter unit is dirty.
The nozzle is clogged.
Dust escapes The filter unit has not been
from the placed properly in the dust
appliance. compartment.
The filter unit has not been
placed in the dust
compartment at all.
Solutions
Empty the dust compartment
(see chapter 'Cleaning',
section 'Emptying the dust
compartment')
Charge the appliance (see
chapter 'Preparing for use',
section 'Charging the
appliance').
Clean the filter unit (see
chapter 'Cleaning', section
'Emptying the dust
compartment').
Remove the obstruction from
the nozzle.
Reinsert the filter unit. See
chapter 'Cleaning' for
instructions about placing the
filter unit in the dust
compartment.
Place the filter unit in the dust
compartment. See chapter
'Cleaning' for instructions
about placing the filter unit in
the dust compartment.