Publicité
Les langues disponibles
Les langues disponibles
Compatibility
The Adapters are compatible with the Philips ECG leadsets and OEM
trunk cables listed on page ii at the front of this document.
Note: Be sure to verify compatibility before using an Adapter with any
unlisted trunk cable.
Warnings
Warnings listed below apply to Adapter application and patient safety. Be
sure to also reference Notes, Cautions, and Warnings defined by the
Instructions for Use (IFU) associated with each compatible Philips leadset,
OEM trunk cable, and OEM monitor.
• Use the Adapter only with compatible Philips leadsets and OEM trunk
cable combinations.
• Visually inspect the Adapter for damage, visual/gross contamination,
and cleanliness prior to use. If inspection shows any signs of cracks or
damage, or if there appears to be any liquid, lint, or dust in the leadset or
trunk connectors, do not use the Adapter.
• Do not use the Adapter under massive influence of fluids (e.g. rain).
• Be sure that the leadset and trunk cable connectors are properly and fully
inserted into the Adapter connectors. All connections must be secure.
• Carefully position the Adapter, leadset, and trunk cable to avoid patient
entanglement, choking, and strangulation. Also verify that positioning
does not cause entanglement of IV tubes or restrict IV flow.
• Always clean and disinfect the Adapter prior to use on another patient
(see Cleaning and Low-Level Disinfection).
Disposal
Any Adapter showing signs of physical or electrical deterioration or
failure should be disinfected and disposed of according to local laws
regarding disposal of hospital waste.
Stryker Internal Control No.: EL10052 Rev C
2
Publicité
