Operation - RIDGID AM25600 Manuel Du Propriétaire

Operation

Place Air Mover in desired operating position
Foot Bumpers (4)
Floor & Carpet
Air Mover Interconnection
RIDGID Air Movers can be interconnected
in series using the convenience outlets.
Applicable Models include AM22870
and AM22880. If utilizing the series
interconnection feature, only use Air
Movers that total
recommended
convenience outlet rating. The 8 Amp
on-board circuit breaker will allow up to
two (2) additional RIDGID Air Movers to
run on the first Air Mover at the same time.
SP7019-1 3-Speed Air Mover 01 2020.indd 5
less than
7.9 Amp maximum
(Your Unit May Not Be As Illustrated)
90° Ceilings & Ventilation
45° Walls & Ventilation
NOTE: Air Mover Models AM22870 and
AM22880 are equipped with convenience
outlets with an on-board 8 Amp circuit
breaker. If
overloads, the circuit breaker will trip. If the
circuit breaker does trip, turn the switch to
the off position and unplug all units then
the
press the circuit breaker reset button.
Plug the units back into the power source.
The on-board convenience outlets on the
Air Mover will be actively powered when
the Air Mover is plugged in and the circuit
breaker is properly reset.
5
the convenience
1/23/20 1:58 PM
:
outlet