Motor Specifications And Electrical Requirements - RIDGID AM25600 Manuel Du Propriétaire

CAUTION:
!
• For dusty operations, wear dust mask.
• Do not move or carry Air Mover when it
is operating.
• Only operate on a level and stable surface
to prevent the Air Mover from falling and
possibly causing injury or damage to unit.
Motor Specifications and
Electrical Requirements
This Air Mover is provided with a 3-speed,
115 volt, 60 Hz induction motor with
a grounding conductor.
protected and will automatically shut down
if over-heated. Once it cools, the motor
will restart automatically if not unplugged.
In the event of a malfunction or
breakdown, grounding provides a path
of least resistance for electric current
to reduce the risk of electric shock.
SP7019-1 3-Speed Air Mover 01 2020.indd 3
SAVE THIS MANUAL
It is thermally
Observe the following warnings that
appear on the motor housing of your
Air Mover:
WARNING:
!
To reduce the risk of electric shock,
connect only to a GFCI protected
outlet. Do not expose to water or
rain. Indoor use only.
CAUTION:
!
• This Air Mover has an automatic
motor shutoff device; it may
restart without notice. To reduce
the risk of injury, unplug before
servicing.
• Do not use an extension cord with
this fan.
WARNING:
!
TO REDUCE THE RISK OF TIP-OVER
DURING STORAGE, STACK 2-HIGH
ONLY.
WARNING:
Do not exceed 8 Amps through the
on-board convenience outlets (AM22870
& AM22880).
This Air Mover is equipped with an electric
cord having an equipment grounding
conductor and a grounding plug. The plug
must be plugged into a matching outlet
that is properly installed and grounded
in accordance with all local codes and
ordinances.
Do not modify the plug provided. If it will
not fit the outlet, have the proper outlet
installed by a qualified electrician.
3
1/23/20 1:58 PM