Control Panel And Operation - Klarstein BEERLAGER 56 Mode D'emploi

EN
30

CONTROL PANEL AND OPERATION

1 On/Off
2
Light
3 High
4
Down
5
Child Safety Lock
6
°C/°F
Press and hold the button for 3 seconds to enter
standby mode. Press and hold the button again for 3
seconds to return to normal operation.
Press the button to turn the interior LED lights on or off.
In standby mode, the key is invalid.
Press the button once and the LED display will show
the current temperature setting. Press the button several
times to increase the temperature in 1°C increments.
Then wait 5 seconds without pressing any key, the set
temperature will be accepted. The LED display will
then show the current temperature inside.
Press the button once, the LED display shows the
current temperature. Press the button several times to
decrease the temperature in 1°C increments. Then
wait 5 seconds without pressing any key, the set
temperature will be accepted. The LED display will
then show the current temperature inside.
Lock: Press both buttons simultaneously for 3 seconds
to lock. Unlock: Press both buttons simultaneously for
3 seconds to unlock.
You can switch between Fahrenheit and Celsius by
pressing both buttons simultaneously.