Start And Operation; Cleaning And Care - Klarstein POPLIFE Mode D'emploi

EN
20

START AND OPERATION

1. It is important that upon receipt you stand your appliance upright for at least 4
hours before switching on to allow the system to settle
2. When using the cooler for the first time, set the thermostat to setting 3 or 4. When
the refrigeration system starts, you will hear the quiet hum of the compres sor. You
may also hear the circulation of liquids and gases. This is normal on first start up,
Generally it will take 2-3 hours for the appliance to reach temperature. Once
temperature has been reached then put the beverages inside.
3. See below for location of thermostat and light switch on this model.
Light Switch

CLEANING AND CARE

Outside
The outside of your refrigerator can be cleaned using a soft cloth moistened with a
mild detergent solution. Wipe dry with kitchen towel. Do not use chemical or abrasive
cleaners on any part of your refrigerator as these could permanently damage or
discolour the surfaces.